Hazardous Energies
Employees who perform service or maintenance on machinery or equipment that may store hazardous energy or pose a hazard to the employee upon reenergizing may requiring training in 日韩无码's Lockout/Tagout Program. See your supervisor to arrange this training specific to the needs of your workplace.
Hazardous energy is defined as:
- electrical energy
- thermal energy,
- mechanical energy,
- hydraulic energy,
- pneumatic energy,
- chemical energy, and
- ionizing and non-ionizing radiation energy.
Lock Out/Tag Out
OSHA and Lockout Tagout (LOTO)
in order to prevent serious injuries and potential death, OSHA has specific program requirements for the control of hazardous energy of permanently-wired equipment. Anyone who is servicing or maintaining equipment that is hard-wired should talk to their Laboratory Safety Coordinator and find out what required procedures must be in place and what training is required in order to properly Control Hazardous Energy.
This OSHA standard does not apply to electrically-powered machines that can be completely disconnected by unplugging a cord if the cord is under the exclusive control of the person doing the maintenance or repairs.
Occupational Health and Safety Office has developed 日韩无码鈥檚 best resource for guiding departments through having both a written program and written procedures. A hazard analysis is first required to confirm the presence of hazardous energy. If hazardous energy is confirmed, the appropriate lockout procedure must be documented and used.
What is Lockout/Tagout?
Lockout/Tagout (LOTO) is a safety procedure which is used in industry and research settings to ensure that dangerous machines are properly shut off and not able to be started up again prior to the completion of maintenance or report work.
LOTO Program
The purpose of this program is to ensure that before an employee performs services or maintenance on machinery or equipment, where potential unexpected energizing, startup, or release of energy could occur and cause injury, machinery or equipment will be rendered safe to work on by being LOTO.
All equipment and machinery energy source(s) (any source of electrical, mechanical, hydraulic, pneumatic, chemical, thermal, or other energy) shall be LOTO to protect against accidental or inadvertent peration during any servicing or maintenance activity. Any unauthorized operation or attempt to operate any switch, valve, or other energy isolating device that is LOTO will be disciplined.
Lockout means the placement of a lock on an energy-isolating device of a machine or on equipment in order to prevent the operation of the machine or equipment until the lock is removed. Energy isolating devices can include circuit breakers, switches, valves, and blocks.
Tagout means the placement of a tag which can be securely fastened to an energy-isolating device to indicate that the machinery or equipment may not be operated until the tagout device is removed
Control Hazardous Energy
Exposure to hazardous energy happens from the unexpected energization or start-up of machines, equipment, or systems. This can cause death or serious injury. Hazardous energy is defined as:
- electrical energy
- thermal energy,
- mechanical energy,
- hydraulic energy,
- pneumatic energy,
- chemical energy, and
- ionizing and non-ionizing radiation energy.
OSHA and Lockout Tagout (LOTO)
in order to prevent serious injuries and potential death, OSHA has specific program requirements for the control of hazardous energy of permanently-wired equipment. Anyone who is servicing or maintaining equipment that is hard-wired should talk to their Laboratory Safety Coordinator and find out what required procedures must be in place and what training is required in order to properly Control Hazardous Energy.
This OSHA standard does not apply to electrically-powered machines that can be completely disconnected by unplugging a cord if the cord is under the exclusive control of the person doing the maintenance or repairs.
Occupational Health and Safety Office has developed 日韩无码鈥檚 best resource for guiding departments through having both a written program and written procedures. A hazard analysis is first required to confirm the presence of hazardous energy. If hazardous energy is confirmed, the appropriate lockout procedure must be documented and used.